Leading 10 common forklift accidents ， forklift operation should pay attention to these issues ！.
Leading 10 common forklift accidents ， forklift operation should pay attention to these issues ！.
Blog Article
Don't ignore the forklift at the office. If the procedure is bad, there will be serious crashes in minutes, and there are numerous accidents including forklifts.
Case 1: The forklift cargo blocked the driver's view, and the individual in front might not be located, causing a moving accident.
Situation 2: In order to maintain the balance of the forklift when raising heavy goods, the workers used their body weight as the weight, which virtually caused casualties.
Instance 3: The size of the forklift cargo goes beyond the permitted width of the path and hangs on the roadside rack, which almost creates an crash.
Case 4: Forklift is speeding up and surrender during a turn.
Case 5: The forklift motorist did not observe the pedestrian, and the pedestrian did not notice the forklift.
Instance 6: The forklift lifts the employees illegally, the forklift vehicle driver does not use the safety belt, the forklift lifter falls and the driver is squashed when the forklift rolls over.
Instance 7: The forklift chauffeur did not wear a safety belt and dropped from the car when it rolled over and was squashed.
Forklift procedure ought to focus on these matters ：.
Begin.
1. Prior to beginning, observe the environments, and after validating that there are no barriers that hinder the safety of driving, beep the horn initially and afterwards begin.
2. For lorries with hydraulic (air pressure) brakes, the brake hydraulic stress (air pressure) gauge need to be secure before beginning.
3. When the forklift begins with a tons, the driver needs to first verify that the lots is stable and trusted.
4. The begin must be slow-moving and constant.
Driving.
1. When driving, the elevation between the bottom end of the fork and the ground should be kept at 300mm-400mm, and the mast should be tilted backwards. .
2. Do not lift the fork too expensive when driving. When getting in and leaving the job website or while driving, beware that there will certainly be no obstacles in the sky. When the tons is traveling, the fork should not be raised too high, which will certainly affect the stability of the forklift. .
3. After discharging, the fork must be reduced to the typical driving setting before driving. .
4. When transforming, if there are pedestrians or cars nearby, the driving signal should be issued first. High-speed doglegs are banned. High-speed doglegs will cause the car to lose side security and tip over. .
5. When the forklift is downhill, it is purely forbidden to turn off the fire and slide, and it is restricted to brake instantly while driving with tons unless there are special scenarios.
6. When the forklift is running, it needs to follow the website traffic rules in the factory and must maintain a certain safety and security range from the lorry in front. .
7. When the forklift is running, the lots should remain in the lowest position that does not prevent the driving, and the gantry ought to be properly slanted back. The load shall not be raised except when stacking or packing. .
8. The height of the load have to not obstruct the chauffeur's view. In unique situations, when the product influences the forward vision, drive at a reduced rate when turning around.
9. It is forbidden to switch on the ramp, nor to drive throughout the ramp. .
10. The secure driving speed of the forklift in the factory area is 5 km/h, and it has to drive securely at a reduced speed when entering the production workshop area. .
11. When the forklift is raised, lifted or driven, it is restricted for employees to stand on the fork to hold products and play a stabilizing function. .
12. If problems are located, they will be fixed and reported in a prompt manner, and they will never ever run with health problems or conceal them.
packing and unloading.
1. When fork-loading items, the range in between the two forks should be adjusted as required to make the lots of the two forks balanced and not skewed, and one side of the item should protest the rack. .
2. It is restricted to collaborate with a Electric Forklift Truck for Warehouse single fork or make use of a fork top or draw. In unique circumstances, safety indication have to be established to advise surrounding pedestrians. .
3. In the process of packing and unloading products, the forklift has to be braked with the brake. .
4. The speed of the automobile should be slow-moving and stable. Take care not to roll the wheels on the dunnage, so as not to stretch the rolled items and harm individuals. .
5. When utilizing a Stand-on Electric Pallet Stacker fork to fork the goods, the fork should be as deep as possible under the lots, and it should be kept in mind that the fork tip ought to not touch various other goods or objects. The tons should be stabilized with minimal back tilt of the gantry so that the tons does not slide in reverse. The mast can be tilted forward a little when the lots is lowered to enable easy placement of the load and extraction of the forks. .
6. It is prohibited to fork products at broadband and hit difficult objects with the fork head. .
7. When the forklift is working, it is forbidden for individuals to stand around the fork, so as to stay clear of the collapse of the goods and harm individuals. .
8. Straining is banned, and it is restricted to use forks to raise personnel to engage in high-altitude procedures to stay clear of high-altitude falling crashes. .
9. It is not permitted to utilize the brake inertia to slide, put, round or roll things. .
10. It is not allowed to make use of forks to choose, turn pallet dump.
Leaving .
1. It is prohibited to leave the forklift when the products on the fork are in the air. Prior to leaving the forklift, you must unload the goods or reduced the fork framework.
2. Draw the emergency brake handle to dead or dispirit the parking brake button.
3. The engine is shut off and the power is cut off. (Except for special circumstances, such as the motorist does not leave the vehicle's line of sight and does not exceed 1 minute).
4. Remove the key. .
Forklift Operation Precautions.
1. Before and after the forklift operation, the look needs to be examined, and gas, lubing oil and air conditioning water ought to be included.
2. Examine the safety performance of beginning, running and stopping.
3. Check whether the lights and horn signals are complete and effective.
4. Throughout the procedure of the forklift, check whether the pressure and temperature are typical.
5. After the forklift is running, the exterior leak ought to also be examined and the seals must be replaced in time.
Forklift Safety Operation Specifications.
1. You should inspect before leaving the car;.
2. When you encounter someone before you throughout driving, you should send out a signal at a distance of 5 m;.
3. The driving speed in the factory does not exceed 5 km/h;.
4. When driving, the low point of the freight must be 0.3 m ~ 0.4 m above the ground;.
5. The transforming need to not be also sharp to avoid the tendency of " complimentary turning";.
6. Running up and down the incline needs to be sluggish and consistent, and no turning on the incline is permitted.
7. Do not drive across the slope. When the gradient is more than 10%, the automobile ought to be driven backwards when declining;.
8. When the forklift workers lug the goods and progress, if they experience large or heavy goods and go to the chauffeur's line of vision, they need to take the turning around workout
.
The "Eight Prohibitions" should be complied with in the operation.
1. Solitary fork procedure is not allowed.
2. It is not enabled to lift the goods for far away driving.
3. It is not permitted to get the goods by turning over the pallet with the fork.
4. It is not enabled to directly shovel chemicals, flammables and other dangerous chemicals with forks.
5. It is not allowed to utilize inertia pressure to pick up the goods.
6. It is not enabled to utilize stopping pressure to expatriation round or easy-to-roll things.
7. It is not allowed to bring people to deal with the pallet or fork, and it is purely restricted to stand under the fork after the fork is raised.
8. Do not drive laterally on inclines
.
Vehicle parking is not permitted under the list below problems.
1. Contours, narrow roads, railway crossings;.
2. Areas with a longitudinal slope above 5%.
3. When there is an obstacle on one side of the roadway, the opposite side of the section with the very same size as the challenge ought to be within 20 meters at each end.
Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844